Back to ICAS Main Page
??

■ Product Catalog

[IDC-136II-KIT] 136kHz Band DC Receiver Kit 　Price US$45.00
 [IDC-136II-BLT] 136kHz Band DC Receiver with enclosure - built and tested Price US$95.00

 IDC-136II-KIT is a direct conversion receiver designed exclusively for 136kHz band
reception. With the use of SDR software, it will work as your main or sub receiver.
It's quite simple and you only need a couple of hours to build and get ready to receive.
The local oscillation is obtained by dividing a 8MHz osillator by 64, so the stability
is quite high (QRH to less than 0.1Hz order). Since this receiver is not a SDR requiring
both I/Q signals, you can connect it to the MIC input of your laptop PC.


Principle of IDC-136II-KIT

1) With the use of the built-in BPF, images are removed, making it possible to use
    manoaural input of your PC.
2) The BPF has some attenuation, so the pre-amp is installed to compensate for
    the loss.
3) The local oscillation is obtained from a 8MHz oscillator divided by 64. Then,
    the LO (@125kHz) is subtracted from the target signal to get an audio frequency in
    the range from 5 to 8kHz.
4) The audio output from IDC-136II-KIT can then be demodulated through software
    such as Spectrum Lab or HDSDR.
Features of IDC-136II-KIT:
◆ Simple structure - needs just a couple of hours for assembly.
◆ Dividing by 64 makes it almost QRH-free - suitable for up to QRSS240.
◆ Sharp software filters can be utilized.
 ◆ Small current consumption - ideal for 24/365 running grabbers

System Requirements:
A Windows PC equipped with a MIC or Line-In input with Spectrum Lab or SDR software
installed. You need to prepare an antenna for 136kHz and a power supply unit of 9 - 13.8VDC.

　
■ Specifications
  • RX Coverage：　101 ～ 149kHz
    　 (when a 48kHz sound card is used)
  • LO: 125kHz = 8MHz divided by 64
  • Power Supply: external 9V～ 13.8VDC, ca. 30mA
  • Dimension of PCB: 77 x 43mm


    (Specifications subject to change without prior notice)
  • OSC of 8MHz (125kHz LO) is available upon request.

    • Note: The enclosure is NOT included in IDC-136II-KIT. IDC-136II-BLT comes with enclosure. 　

    Connections



    Case History:
    We have been running a 136kHz grabber 24/365 with an IDC-136II-KIT(BLT) at:
    http://icas.to/argo

    Also, some overseas stations having been running grabbers at:
     http://dl.dropbox.com/u/74746618/LF/YV7MAE_LF_Grabber.html (YV7MAE)
    http://dl.dropboxusercontent.com/u/213645899/LFgrabber/SV8CS_LF_Grabber.html (SV8CS)

    Recommended Software
    To start with, HDSDR is a good SDR software to use with the IDC-136II-KIT.
    For the reception of QRSS/DFCW, we highly recommend Spectrum Lab.
    Assembly Guide:
    Please download and read through this assembly manual before the purchase.
    We are unable to accept any return goods.
    Assembly Manual for IDC-136II-KIT


    Shipping Charges via EMS:
    We have started to ship worldwide. All charges outside of Japan should be bourne
    by the purchaser. EMS is a secure way to deliver the goods.
    -Asia (excluding Middle East): US$14.00
    -NA, CA, Middle East, OC: US$20.00
    -Europe (including Russia): US$22.00
    -SA and AF: US$24.00
    (may vary depeding on JPY/US$ exchange rate fluctuation.)

    You can place your order by giving the following info:
    -Model No. and Quantity you order
    -Your Name
    -Your complete Postal Address
    -Phone Number
    Send an order mail to: order @ icas.to (please remove spaces)

    Payment Method:
    We accept Paypal only. The Paypal mail address will be given in the order confirmation return mail.

    Back to ICAS Main Page
    ??

    Copyright (C)1999 ICAS Enterprises. All rights reserved.