IDAS Filters for Cooled-CCD Cameras - LRGB Type2 & Type3
Now Released!!

Spectrum Transmittance of LRGB Type2 Filter (NEW) (Clear filter is an option.)

Main Features of LRGB Type2 Filter

Ir-block coating is provided for each color of L
RGB.
This is highly efficient in blocking Ir up to 1,130nm, thus adaptable to most of the CCDs.
The transmittance curve of each color crosses with each other with a slow slope, making intermediate color reproduction better.
UV is blocked out. (Note that Clear filter does not block UV.)
Blurred focusing due to color aberration can be minimized when refractor systems are used.

- Quantum Efficiency -
CCD used is E chip of Kodak KAF series.
RGB Type2 (new)
Continuous Spectra: R=1.0 G=1.5 B=1.8
Planetary Nebula: H-alpha(R)=1.0 O-III(G,B)=1.5 H-beta(B)=1.3

CCD used is the normal chip of Kodak KAF series.
RGB Type2 (new)
Continuous Spectra: R=1.0 G=1.3 B=2.4
Planetary Nebula: H-alpha(R)=1.0 O-III(G,B)=1.0 H-beta(B)=2.5


Transmittance of LRGB Type3 Filter

Main Features of LRGB Type3 Filter

Ir-block coating is provided for each color of L
RGB.
Three filters consisting of L, R and B
will pass OII through. G filter will block UV range out.

The most outstanding feature is that like with naked eyes, wavelengths shorter than 450nm will be reproduced as purple.

The curve of R is sloped slowly below 450nm so that Type 3 can successfully reproduce
monochromatic purple color, which used to be hard to achieve with the conventional filters.


The transmittance curve of each color crosses with each other with a slow slope, making intermediate color reproduction better.


*Type3 Filter can only block Ir up to about 1,050nm, because it passes OII of off-purple range.

- Quantum Efficiency -
CCD used is E chip of Kodak KAF series.
RGB Type3
Continuous Spectra: R=1.0 G=0.9 B=1.2
Planetary Nebula: H-alpha(R)=1.0 O-III(G,B)=1.5 H-beta(B)=1.4

CCD used is the normal chip of Kodak KAF series.
RGB Type3
Continuous Spectra: R=1.0 G=0.9 B=1.7
Planetary Nebula: H-alpha(R)=1.0 O-III(G,B)=1.0 H-beta(B)=2.5

Sizes Available:

31.7mm (M28.6 P0.6) (Filter thickness is 1.1mm.) Compatible with SBIG CFW-8A and IDAS motor-driven filter wheel (to be released soon).
IDAS LRGB Type2, Complete Set
IDAS LRGB Type2 + Clear Filter, Complete Set
IDAS LRGB Type3, Complete Set
IDAS LRGB Type 3 + Clear Filter, Complete Set

M37mm (Filter thickness is 1.1mm.) Compatible with IDAS motor-driven filter wheel (to be released soon).
IDAS LRGB Type2, Complete Set
IDAS LRGB Type3, Complete Set

For order, please go to:Order
For any inquiry, please send a mail to:Mail

Back


Copyright (C)1999 ICAS Enterprises. All rights reserved.